Airless Flat Tips

Premium Standard

* Tip size will not go further than 0.075 inch/1.9 mm, 21 L/min at 100 Bar

Tip sizes

Angles in degrees and pattern width in inches at 12″(30 cm) from surface
Flow rates at a water pressure of 100 Bar

inch	mm	10° 2/3 in.	20° 4/6 in.	30° 6/8 in.	40° 8/10 in.	50° 10/12 in.	60° 12/14 in.	70° 14/16 in.	80° 16/18 in.	90° 18/20 in.	100° 20/22 in.	110° 22/24 in.	120° 24/26 in.	130° 26/28 in.	L/min
0.007	0.18	X	X	X	X	X	X								0.18
0.008	0.20	X	X	X	X	X	X								0.22
0.009	0.23	X/X	X/X	X/X	X/X	X/X	X	X							0.25
0.010	0.25	X/X	X/X	X/X	X/X	X/X	X	X							0.33
0.011	0.28	X/X	X/X	X/X	X/X	X/X	X/X	X	X	X					0.37
0.012	0.30	X/X	X/X	X/X	X/X	X/X	X/X	X	X	X	X				0.47
0.013	0.33	X/X	X/X	X/X	X/X	X/X	X/X	X/X	X	X	X	X			0.57
0.014	0.35	X/X	X/X	X/X	X/X	X/X	X/X	X/X	X/X	X	X	X			0.65
0.015	0.38	X/X	X/X	X/X	X/X	X/X	X/X	X/X	X/X	X	X	X			0.72
0.016	0.40	X/X	X/X	X/X	X/X	X/X	X/X	X/X	X/X	X/X	X	X			0.91
0.017	0.43	X/X	X/X	X/X	X/X	X/X	X/X	X/X	X/X	X/X	X/X	X			0.98
0.018	0.45	X/X	X/X	X/X	X/X	X/X	X/X	X/X	X/X	X/X	X/X	X			1.10
0.019	0.48	X/X	X/X	X/X	X/X	X/X	X/X	X/X	X/X	X/X	X/X	X/X	X		1.30
0.020	0.50	X/X	X/X	X/X	X/X	X/X	X/X	X/X	X/X	X/X	X/X	X/X	X		1.40
0.021	0.53	X/X	X/X	X/X	X/X	X/X	X/X	X/X	X/X	X/X	X/X	X/X	X/X		1.52
0.022	0.55	X/X	X/X	X/X	X/X	X/X	X/X	X/X	X/X	X/X	X/X	X/X	X/X		1.65
0.023	0.58		X/X	X/X	X/X	X/X	X/X	X/X	X/X	X/X	X/X	X/X	X/X		1.83
0.024	0.60		X/X	X/X	X/X	X/X	X/X	X/X	X/X	X/X	X/X	X/X	X/X		1.95
0.025	0.63		X/X	X/X	X/X	X/X	X/X	X/X	X/X	X/X	X/X	X/X	X/X		2.13
0.027	0.68		X/X	X/X	X/X	X/X	X/X	X/X	X/X	X/X	X/X	X/X	X/X		2.50
0.029	0.73		X/X	X/X	X/X	X/X	X/X	X/X	X/X	X/X	X/X	X/X	X/X	X	2.95
0.031	0.78		X/X	X/X	X/X	X/X	X/X	X/X	X/X	X/X	X/X	X/X	X/X	X	3.42
0.033	0.84		X/X	X/X	X/X	X/X	X/X	X/X	X/X	X/X	X/X	X/X	X/X	X	3.80
0.035	0.89		X/X	X/X	X/X	X/X	X/X	X/X	X/X	X/X	X/X	X/X	X/X	X	4.30
0.037	0.94		X	X/X	X/X	X/X	X/X	X/X	X/X	X/X	X/X	X/X	X/X	X	5.10
0.039	0.99		X	X/X	X/X	X/X	X/X	X/X	X/X	X/X	X/X	X/X	X/X	X	5.50
0.041	1.04		X	X/X	X/X	X/X	X/X	X/X	X/X	X/X	X/X	X/X	X/X	X	6.15
0.043	1.09		X	X/X	X/X	X/X	X/X	X/X	X/X	X/X	X/X	X/X	X/X	X	6.80
0.045	1.14		X	X/X	X/X	X/X	X/X	X/X	X/X	X/X	X/X	X/X	X/X	X	7.40
0.047	1.19		X	X	X/X	X/X	X/X	X/X	X/X	X/X	X/X	X/X	X/X	X	7.94
0.049	1.24		X	X	X/X	X/X	X/X	X/X	X/X	X/X	X/X	X/X	X	X	8.50
0.051	1.29		X	X	X/X	X/X	X/X	X/X	X/X	X/X	X/X	X	X	X	9.10
0.053	1.35		X	X	X/X	X/X	X/X	X/X	X/X	X/X	X	X	X	X	9.80
0.055	1.4		X	X	X/X	X/X	X/X	X/X	X/X	X	X	X	X	X	11.00
0.057	1.45			X	X	X	X	X	X	X	X	X	X	X	11.80
0.059	1.50			X	X	X	X	X	X	X	X	X	X	X	12.50
0.061	1.55			X	X	X	X	X	X	X	X	X	X	X	13.70
0.063	1.60			X	X	X	X	X	X	X	X	X	X	X	14.31
0.065	1.65				X	X	X	X	X	X	X	X	X	X	15.22
0.067	1.70				X	X	X	X	X	X	X	X	X	X	16.00
0.069	1.75				X	X	X	X	X	X	X	X	X	X	17.09
0.071	1.80				X	X	X	X	X	X	X	X	X	X	18.07
0.073	1.85				X	X	X	X	X	X	X	X	X	X	19.07
0.075	1.90				X	X	X	X	X	X	X	X	X		20.09
0.077	1.95				X	X	X	X	X	X	X	X	X		21.13
0.079	2.00				X	X	X	X	X	X	X	X			22.20
0.081	2.05				X	X	X	X	X	X	X	X			23.30
0.083	2.10				X	X	X	X	X	X	X	X			24.41
0.085	2.16				X	X	X	X	X	X	X	X			25.55
0.086	2.18				X	X	X	X	X	X	X	X			26.13
0.087	2.21				X	X	X	X	X	X	X	X			26.72
0.089	2.26				X	X	X	X	X	X	X	X			27.91
0.091	2.31				X	X	X	X	X	X	X	X			29.12
0.093	2.36				X	X	X	X	X	X	X				30.35
0.095	2.41				X	X	X	X	X	X					32.00
0.097	2.46				X	X	X	X	X	X					32.90
0.099	2.51				X	X	X	X	X	X					34.00

Super Finish

* Tip sizes to be defined depending on applications

Tip sizes (63-509/63-519/63-521)

Angles in degrees and pattern width in inches at 12″(30 cm) from surface
Flow rates at a water pressure of 100 Bar

inch	mm	10° 2/3 in.	20° 4/6 in.	30° 6/8 in.	40° 8/10 in.	50° 10/12 in.	60° 12/14 in.	70° 14/16 in.	80° 16/18 in.	90° 18/20 in.	L/min
0.006	0.15	X	X	X	X						0.14
0.007	0.18	X	X	X	X	X					0.18
0.008	0.20	X	X	X	X	X	X				0.22
0.009	0.23	X	X	X	X	X	X				0.25
0.010	0.25	X	X	X	X	X	X	X	X		0.33
0.011	0.28	X	X	X	X	X	X	X	X		0.37
0.012	0.30	X	X	X	X	X	X	X	X	X	0.47
0.013	0.33		X	X	X	X	X	X	X	X	0.57
0.014	0.35		X	X	X	X	X	X	X	X	0.65
0.015	0.38		X	X	X	X	X	X	X	X	0.72
0.016	0.40		X	X	X	X	X	X	X	X	0.91
0.017	0.43		X	X	X	X	X	X	X	X	0.98
0.018	0.45		X	X	X	X	X	X	X	X	1.10
0.019	0.48		X	X	X	X	X	X	X	X	1.30
0.020	0.50		X	X	X	X	X	X	X	X	1.40
0.021	0.53		X	X	X	X	X	X	X	X	1.52
0.022	0.55		X	X	X	X	X	X	X	X	1.65
0.023	0.58		X	X	X	X	X	X	X	X	1.83
0.024	0.60		X	X	X	X	X	X	X	X	1.95
0.025	0.64			X	X	X	X	X	X	X	2.13
0.026	0.66			X	X	X	X	X	X	X	2.46
0.027	0.69			X	X	X	X	X	X	X	2.50
0.028	0.71			X	X	X	X	X	X	X	2.85
0.029	0.74			X	X	X	X	X	X	X	2.95
0.030	0.76			X	X	X	X	X	X	X	3..28
0.031	0.79			X	X	X	X	X	X	X	3.42
0.032	0.81			X	X	X	X	X	X		3.73
0.033	0.84			X	X	X	X	X			3.80
0.034	0.86			X	X	X	X	X			4.12

Airless TC Nozzles for Ceramic glazing lines

S.No	Part ref. num	Degree °	Inch	mm	L/min @ 100Bar with water
1	63-503/30-EX 4006	40	0.062	1.60	13.70
2	63-503/30-EX 5003	50	0.043	1.10	6.80
3	63-503/30-EX 5006	50	0.062	1.60	13.70
4	63-502/30-EX 650017	65	0.011	0.28	0.39
5	63-502/30-EX 650025	65	0.013	0.33	0.57
6	63-502/30-EX 650033	65	0.015	0.38	0.75
7	63-502/30-EX 650039	65	0.016	0.41	0.89
8	63-502/30-EX 650044	65	0.017	0.43	1.00
9	63-502/30-EX 650050	65	0.018	0.46	1.10
10	63-502/30-EX 650067	65	0.021	0.53	1.50
11	63-502/30-EX 650080	65	0.023	0.58	1.80
12	63-502/30-EX 6501	65	0.026	0.66	2.30
13	63-502/30-EX 65015	65	0.031	0.79	3.40
14	63-502/30-EX 6502	65	0.036	0.91	4.60
15	63-503/30-EX 6503	65	0.043	1.10	6.80
16	63-503/30-EX 6504	65	0.052	1.30	9.10
17	63-503/30-EX 6505	65	0.055	1.40	11.40
18	63-503/30-EX 6506	65	0.062	1.60	13.70
19	63-503/30-EX 6507	65	0.067	1.70	16.00
20	63-503/30-EX 6508	65	0.072	1.80	18.20
21	63-503/30-EX 6509	65	0.076	1.90	21.00
22	63-502/30-EX 800025	80	0.013	0.33	0.57
23	63-502/30-EX 800033	80	0.015	0.38	0.75
24	63-502/30-EX 800039	80	0.016	0.41	0.89
25	63-502/30-EX 800067	80	0.021	0.53	1.50
26	63-502/30-EX 800080	80	0.023	0.58	1.80
27	63-502/30-EX 8001	80	0.026	0.66	2.30
28	63-502/30-EX 80015	80	0.031	0.79	3.40
29	63-502/30-EX 8002	80	0.036	0.91	4.60
30	63-503/30-EX 8003	80	0.043	1.10	6.80
31	63-503/30-EX 8004	80	0.052	1.30	9.10
32	63-503/30-EX 8005	80	0.055	1.40	11.40
33	63-503/30-EX 8006	80	0.062	1.60	13.70
34	63-503/30-EX 8007	80	0.067	1.70	16.00
35	63-503/30-EX 8008	80	0.072	1.80	18.20
36	63-503/30-EX 8009	80	0.076	1.90	21.00
37	63-502/30-EX 950017	95	0.011	0.28	0.39
38	63-502/30-EX 950025	95	0.013	0.33	0.57
39	63-502/30-EX 950033	95	0.015	0.38	0.75
40	63-502/30-EX 950039	95	0.016	0.41	0.89
41	63-502/30-EX 950067	95	0.021	0.53	1.50
42	63-502/30-EX 950080	95	0.023	0.58	1.80
43	63-502/30-EX 9501	95	0.026	0.66	2.30
44	63-502/30-EX 95015	95	0.031	0.79	3.40
45	63-502/30-EX 9502	95	0.036	0.91	4.60
46	63-503/30-EX 9503	95	0.043	1.10	6.80
47	63-503/30-EX 9504	95	0.052	1.30	9.10
48	63-503/30-EX 9505	95	0.055	1.40	11.40
49	63-503/30-EX 9506	95	0.062	1.60	13.70
50	63-503/30-EX 9507	95	0.067	1.70	16.00
51	63-503/30-EX 9508	95	0.072	1.80	18.20
52	63-503/30-EX 9510	95	0.079	2.00	23.00
53	63-502/30-EX 1100025	110	0.013	0.33	0.57
54	63-502/30-EX 1100033	110	0.015	0.38	0.75
55	63-502/30-EX 1100039	110	0.016	0.41	0.89
56	63-502/30-EX 1100050	110	0.018	0.46	1.10
57	63-502/30-EX 1100067	110	0.021	0.53	1.50
58	63-502/30-EX 1100080	110	0.023	0.58	1.80
59	63-502/30-EX 11001	110	0.026	0.66	2.30
60	63-502/30-EX 110015	110	0.031	0.79	3.40
61	63-502/30-EX 11002	110	0.036	0.91	4.60
62	63-503/30-EX 11003	110	0.043	1.10	6.80
63	63-503/30-EX 11004	110	0.052	1.30	9.10
64	63-503/30-EX 11005	110	0.055	1.40	11.40
65	63-503/30-EX 11006	110	0.062	1.60	13.70
66	63-503/30-EX 11007	110	0.067	1.70	16.00
67	63-503/30-EX 11008	110	0.072	1.80	18.20
68	63-503/30-EX 11009	110	0.076	1.90	21.00
69	63-503/30-EX 11012	110	0.090	2.30	27.00
70	63-502/30-EX 130015	130	0.031	0.79	3.40
71	63-503/30-EX 13002	130	0.036	0.91	4.60
72	63-503/30-EX 13003	130	0.043	1.10	6.80
73	63-503/30-EX 13004	130	0.052	1.30	9.10
74	63-503/30-EX 13005	130	0.055	1.40	11.40
75	63-503/30-EX 13006	130	0.062	1.60	13.70
76	63-503/30-EX 13008	130	0.072	1.80	18.20

Soft Edge (SE) Airless TC Nozzles on offer

S.No	Part ref. num	Degree °	Inch	mm	L/min @ 100Bar with water
1	63-502/30-EX-SE 6502	65	0.036	0.91	4.60
2	63-503/30-EX-SE 6503	65	0.043	1.10	6.80
3	63-503/30-EX-SE 6504	65	0.052	1.30	9.10
4	63-503/30-EX-SE 6505	65	0.055	1.40	11.40
5	63-503/30-EX-SE 6506	65	0.062	1.60	13.70
6	63-502/30-EX-SE 8002	80	0.036	0.91	4.60
7	63-503/30-EX-SE 8003	80	0.043	1.10	6.80
8	63-503/30-EX-SE 8004	80	0.052	1.30	9.10
	63-503/30-EX-SE 8005	80	0.055	1.40	11.40
9	63-502/30-EX-SE 9502	95	0.036	0.91	4.60
10	63-503/30-EX-SE 9503	95	0.043	1.10	6.80
11	63-503/30-EX-SE 9504	95	0.052	1.30	9.10
12	63-503/30-EX-SE 9505	95	0.055	1.40	11.40
13	63-502/30-EX-SE 11002	110	0.036	0.91	4.60
14	63-503/30-EX-SE 11003	110	0.043	1.10	6.80
15	63-503/30-EX-SE 11004	110	0.052	1.30	9.10
16	63-503/30-EX-SE 11005	110	0.055	1.40	11.40